High voltage insulating rubber board in distribution room

With the development of society and the development trend of scientific research, our daily life quality is getting better and better, and more and more articles are touched. For example, the occurrence of industrial rubber board, it is very likely that the group may have a better grasp of the insulating rubber board, but it is likely that they are not familiar with the industrial production of the insulating rubber board. In fact, the shadow of such goods can be seen in the work of power consumption in high and low voltage distribution rooms, power stations and their outskirts. So what must be paid attention to when applying industrial rubber plates? What aspects will harm the quality of industrial production of insulating rubber board? Rubber plate manufacturer to you!
The application and storage of insulating rubber board in industrial production are as follows:
1. The pavement shall be leveled and free from sharp and hard blocks when applied. When laying insulating rubber pad, the joints of insulating rubber pad shall be leveled and not rolled, so as to avoid falling of actual operation personnel during inspection of machine equipment or switching operation;
2. If the insulation rubber mat is found to have cracks, scratches, thin thickness and other conditions that can not ensure the insulation performance during the whole application, it shall be removed and replaced immediately;
3. Insulating rubber board should prevent sun exposure or sharp metal material from scratching. During storage and release, it should prevent the distance from pyrogen (radiator, etc.) too close to prevent aging and mildew aggravating, and thus reduce insulation performance;
4. The manufacturer of insulating rubber board shows that the insulating rubber pad should be dry and clean, and avoid touching with acid, alkali and various raw oil chemicals, so as to prevent aging, cracking or viscosity after being etched, and thus reduce its insulation performance;
The insulating rubber board shall be cleaned once with soap solution once a year. The manufacturer of insulating rubber plate shall remind everyone to pay attention to the level. The tensile strength of rubber pad is still related to temperature. The tensile strength at high temperature is far less than that under indoor temperature. The tensile strength root crosslinking density is related, with the increase of crosslinking density, the tensile strength increases, and then the crosslinking density is increased again after the occurrence value, and the tensile strength will be greatly reduced.