Power plant insulation rubber pad

Appearance of anti-skid insulation rubber pad on red ground: spot mark or uneven: deep layer or height width ratio shall not exceed the thickness tolerance of rubber pad; Bubbles: within each square meter, there are no more than five bubbles with a total area of less than 1cm2, and the spacing between two bubbles is not less than 40mm; Residue: the depth and length of the deep layer shall not exceed that of the rubber pad, and the thickness shall not be less than 40mm; The edge is uneven or honeycomb: the total width is not more than 11mm, and the length is not more than 1 / 10 of the total length of the rubber pad; Crack: not allowed
The red ground anti-skid insulation pad is made of unique vulcanized rubber to enhance the insulation of workers to the ground. Insulating rubber pad is also called insulating rubber plate, insulating rubber pad, insulating blanket, insulating rubber pad, etc. It has high surface resistivity and durable rubber pad. It is made of NR, SBR and IIR non-polar vulcanized rubber. It is used for cabinet countertops or insulation raw materials in working places such as power distribution equipment.
Specification and model of anti-skid insulation rubber pad on red floor:
(1) According to the rated voltage, it can be divided into 8Kv, 10kV, 20kV, 25kV and 35kV
(2) According to the tone can be divided into: gray black rubber pad, red rubber pad, emerald green rubber pad
(3) According to the thickness, it can be divided into 3 mm, 5 mm, 6 mm, 8 mm, 11 mm and 12 mm
(4) The total width is; 1 meter, 1.1 meter, 1.5 meter, the standard width is 1 meter, the length of a roll is divided into 5 meters and 10 meters.
Application scope and storage of red ground anti-skid insulating rubber mat:
It is widely used in distribution stations, power stations, high and low voltage distribution rooms, experimental roommates and their suburban electrical operations. Generally, antistatic insulating rubber pad, flame retardant rubber pad and insulating rubber pad shall be stored in dry and naturally ventilated natural environment, away from pyrogen and 20 cm above the road and wall. It can prevent the environment from being polluted by strong acid, strong alkali and oil. It is not necessary to avoid the sun outside.